| Accessories |
Nozzle Attachment, Instruction Manual, Warranty Certificate, Guarantee Card
|
| Size | Approx. 246mm x 81mm x 232mm (not including the electrical cord or nozzle attachment) |
| Materials |
[Dryer] Polycarbonate, ABS, steel, carbon
[Nozzle attachment] Nylon |
| Weight | 695g (including the electrical cord, not including the nozzle attachment) |
| Voltage | AC220V 50Hz |
| Power Consumption | 1800W (on HIGH) |
| Power cord length | Approx. 2.5m |
| Country of manufacture | China |
| Quantity |
Loading...
Currently out of stock
Currently out of stock
|
|---|
Note: Effectiveness may differ depending on hair type and the environment in which the product is used.
When you’ve just stepped out of a salon, your hair is perfectly styled ‒ yet surprisingly silky and soft. While the outer layer of your hair follicles is completely dry, the inside of each follicle remains hydrated and healthy thanks to professional hairstyling techniques that involve using the eyes and hands to perfectly monitor the heat from the dryer and the moisture levels of the hair.
The ReFa BEAUTECH DRYER uses cutting-edge technology to replicate these same professional hairstyling techniques with Pro-Sensing automatic temperature adjustment and Hydro Ions for silky soft, healthy-looking hair that looks like you just stepped out of a salon.
The unique Pro-Sensing technology in the ReFa BEAUTECH DRYER protects the hair from heat damage with a heat-controlling target sensor, which monitors the temperature of hair and automatically switches between warm and cool air to keep it below 60℃ at all times.
Note: Tests were conducted in an environment with a temperature of 22 ± 1℃ and humidity of 50 ± 5%.
The dryer (ReFa BEAUTECH DRYER) was held so that the air outlet was approximately 5cm from the head.
A thermographic camera (provided by Nippon Avionics) was used to measure the changes in temperature on the surface of the hair.
The ReFa BEAUTECH DRYER generates replenishing Hydro Ions.
The inside of the ReFa BEAUTECH DRYER is equipped with a 99.9% pure high-density carbon plate and an ionizer.
You can choose different modes for giving your hair a silky or a voluminous finish.
Sensing: MOIST
Sensing: VOLUME UP
●All indicators flash white and then change to solid white, which means that the product is in standby mode.
●The power will turn off automatically if you don't press any buttons for approx. 60 seconds.
The mode switches each time the mode button is pressed.
［HIGH］（Powerful hot air）
↓
［LOW］ （Moderate hot）
↓
［COOL］（Cool air）
The mode switches each time the sensing button is pressed.
［MOIST］ → ［VOLUME UP］ → Off
●You can select a Pro-Sensing mode when the air blow
mode is set to HIGH or LOW.
● The Pro-Sensing mode will be reset if you switch the
air blow mode. Press the sensing button again to set the
Pro-Sensing mode.
ReFa BEAUTECH DRYER is available at these stores:
